Manufacturer of specialist and one off body panels for classic cars and light commercial vehicles, in steel and aluminium.

Morris Minor

This is a sample of some of the panels I can supply for Morris Minors. All the usual panels can be supplied as well, and I provide a restoration service for unobtainable panels such as pickup sides, tailgates and doors.



Part
Number
Description Price
M01 Van/pickup rear inner arches. Heavy gauge steel , and the only one that is an accurate match to the originals. £68.00
M02 Van/pickup rear half floor. Available separate or spot welded to the arch (M01) £72.00
M03 Rear light 1/4 panel. Full panel from wheel arch to rear lights, with correctly radiused lower rear corner - the only ones with this feature. £18.00
M03a As above, but for early single light model, with fully shaped rear corner. £27.00
M04 Body side front end repair. From front of rear wheel arch to B post, (normally 15” high but can be supplied different heights if req) £18.00
M05FL Van body side, front top corner repair section. Left Hand. £22.00
M05FR Van body side, front top corner repair section. Right Hand. £22.00
M05RL Van body side, rear top corner repair section. Left Hand £22.00
M05RR Van body side, rear top corner repair section. Right Hand £22.00
M06L Van body top of side repair section. Left Hand £18.00
M06R Van body top of side repair section. Right Hand £18.00
M07 Van body guttering straight length. £11.00
M08 Full guttering set for van body. Comprising 4 straight lengths, 2 rear corners and 2 front corners - special offer for the set. £65.00
M08FL Van body guttering corner piece. Front LH corner. £9.50
M08FR Van body guttering corner piece. Front RH corner. £9.50
M08R Van body guttering corner piece. Rear corner (same for left or right hand). £9.50
M09 Cab guttering, formed to correct shape (not just a straight length) 1 length to do one side £16.00
M09a Cab guttering, formed to correct shape 1 length to do one side, but Series 2 squarer profile. £24.00
M09b Cab guttering for Traveller formed to correct shape (not just a straight length) 1 length to do one side £16.00
M09c Guttering length for Minor saloons. Shaped round bottom of screen pillar/bonnet area and curved to suit roofline. Collection only on this, or supplied in two pieces for each side, and can be posted. £25.00
M09d Convertible guttering, shaped to match the profile of the screen pillar. L/H or R/H please state which. £12.00
M10 Sill boxing plate van/pickup. £22.00
M11 Under sill panel for van/pickup with correct flanges all round and drain holes(unlike other pattern panels). £26.00
M13 Outer rear van pickup wheel arch. Hadrian panel but with reprofiled edge flange for better more accurate fit and looks. £35.00
M13a Outer rear van and pickup wheel arch repair section £20.00
M15 Pickup cab back repair panel. £28.00
M16 Fuel filler cover for vans and pickups £18.00
M17 Van body top repair section across the front behind the cab roof. £22.00
M18 Front flitch extension—all types early or late series 2 and Minor 1000. £7.00
M19 Radiator cowl, lower repair section (all types). £18.00
M20 Wing stub, for rubber wing post office vans. £30 plus cost of good s/h doner wing. New wings can be used if req. £30.00
M22 Inner rails for securing loads to, for the inside of van bodys and pickups. Sold by thr foot. max length 4foot, but can be welded into longer lengths £5.00
M23 Floor support for van/pickup wooden floors. Bolts to the chassis crossmember over the back axle and supports the join between the two wooden floor panels. (Limited supply) £25.00
M24 Van/pickup petrol tank front support bar. £15.00
M24a Van/pickup petrol tank rear mounting bracket. £8.00
M25 Folded steel Metro seat subframes to suit saloons/travellers. £28.00
M25a Folded steel Metro seat subframes to suit vans/pickups. £28.00
M25b Universal seat subframe. Similar to Metro ones, but with a wide platfrom for mounting a variety of seats. Position your seat and drill mounting holes to suit. £35.00
M27 Rear pillar repair section for van and pickup bodies. This is the box section up the body side adjacent to the tailgate or doors. About 6" high as standard and goes down below floor level to join with the inner valence - essential for strength. Other size £15.00
M28 Rear pillar gusset panel. Stiffens the join between rear pillar and floor. Has round hole for the indicator bulb holder to project through. £7.50
M28a Series 2 version of the rear gusset panel, without the indicator hole £6.00
M29 Cover piece to protect indicator bulb holder in load bay. Triangular in shape, it screws on to M28 £6.00
M30 Front inner wheel arch. Full domed section (accurate fit based on BMC original). £70.00
M30a Front inner wheel arch. Rear section only for repairing original panel. £15.00
M30b Front inner wheel arch. Repair section for bump stop area £12.00
M32 Body side stays for vans and pickups. Price each £5.00
M34 Cab rear crossmember for van and pickup. (the part with that goes over the transmission tunnel and that the handbrake cables go through). £70.00
M35 Rear load bay front crossmember (bolts to the top of M34 across the back of the cab) £55.00
M36 Inner rear crossmember for vans and pickups. Includes the body mounting brackets. £65.00
M40 Steel exterior sunvisor.With seperate trim strips (fitted with studs so no unsightly screw heads), which can be chrome plated if req. Normally supplied in bare steel. £165.00
M40a Sunvisor fitting kit £35.00
M41 Steel exterior sunvisor. American style. £85.00
M45 Mudflap brackets for PO vans (recommended for all vans/pickups). Price is for a pair. £15.00
M46 Wheelarch liners for in front of the back wheel on vans and pickups. Similar to M45 and recommended for use in conjunction with. These two items completely box in the back wheel protecting the rear body from mud build up and rust. £15.00
MM1L Front Left Hand domed inner wing for early series MM cars - with horizontal flange £55.00
MM1R Front RH domed inner wing for early series MM cars - with horizontal flange £55.00
MM2L Engine bay tie plates for Series MM cars (different to later cars with no large round holes). LH £20.00
MM2R Engine bay tie plates for Series MM cars (different to later cars with no large round holes). RH £20.00
MM3L HEadlamp shrouds / cowls for front inner wings for Series MM lowlight and early highlight cars. LH £35.00
MM3R Headlamp shrouds / cowls for front inner wings for Series MM lowlight and early highlight cars. RH £35.00
MM4L Rear bumper brackets for Series MM cars. The folded steel ones, as opposed to the later forged bars. LH £18.00
MM4R Rear bumper brackets for Series MM cars. The folded steel ones, as opposed to the later forged bars. RH £18.00
MM5L Series 2 rear wings, with the correct higher wheelarch profile. £35 PLUS the cost of a 1000 wing either new or s/h to convert. Or you can supply your own wings for me to alter. £35.00
MM5R Series 2 rear wings, with the correct higher wheelarch profile. £35 PLUS the cost of a 1000 wing either new or s/h to convert. Or you can supply your own wings for me to alter. Email for current cost of new M1000 type wings. £35.00
MM6L Lowlight front wing.Hand made in steel. LH £195.00
MM6R Lowlight front wing.Hand made in steel. RH £195.00

Sample Prices for Repair Services

Diagram of Van parts - Click to open a larger version.


All prices are a general guide and depend
very much on condition of the supplied
components